Technologies

We construct and build customized production plants and machines for your products as required. Our production engineering in use guarantees smallest tolerances also with high quantities.

You decide on the materials used and the designs to be achieved and we develop the economic process to it.

CUTTING AND DEBURRING OF WIRE

  • Materials: low carbon steel, spring steel, stainless steel
  • Ø 1.00 mm to 7.00 mm
  • Length from 15 mm to 2,000 mm
  • Tensile strength up to 1,600 N/mm²

In the wire cutting department the wire is directly drawn from the coil, straightened and cut to the required length. The computer-operated facilities enable maximum flexibility at the production of small as well as large production series. The deburring, chamfering or compressing of wire ends is made on high performance machinery in the production of dimensionally stable wire sections or within series production.

 

TWO- AND THREE-DIMENSIONAL BENDING OF WIRE

Bending parts with a complex geometry are made with CNC-controlled 2D and 3D bending machines. In prototype production for small batches with conventional bending machines; in the fully automated high-volume production there are special, into the production line integrated bending machines used. The machine feeding is made either directly from the coil or from a magazine with pre-cut and processed wires.

  • Wire diameter from 3.00 mm to 10.00 mm
  • Fully automated production
  • Machines with one or two bending heads

BENDING AND MANUFACTURING OF SIMPLE AND COMPLEX DESIGNS

  • Complex tools
  • Hydraulic and eccentric press
  • Inert gas welding, resistance welding, power or medium frequency
  • Materials: low carbon steel, spring steel or stainless steel wire

The realization of complex product geometries in large batch sizes at minimum tolerances is possible because of the fully automated production process with the use of elaborate pressing tools in connection with multiple welding automats. While in high-volume production closed, fully automated production lines and robots are used, semi-automated facilities are assembled for medium and smaller batches; single or prototype productions are made manually.

METAL SURFACE FINISHING

Depending on the technical requirements, different procedures for surface finishing are used: blasting or barrel finishing, galvanization with NiCr or zinc as well as electro polishing, lacquering in required RAL-colors also by cataphoresis. Plastic powder-coating with polyamide, polyethylene, epoxy, PVC and polyurethane in different colors or transparent as well as PTFE coating.

  • Blasting
  • Galvanization
  • Lacquering
  • Plastic coating